Project 05 · 2025

Sundial

A wearable brass sundial made by hand as a leaving present, with a website that calculates its time correction.

Made
Brass, gold-plated, wearable
Given
December 2025
Also built
A correction tool for listed locations and any date
Documented
A booklet of every sketch, calculation and failed version
Fig. 1Wearable band during fabrication
The curved metal band of Mateo's wearable sundial during fabrication
The metal band after bending and marking the hour positions

Why it exists

A close friend was moving to the United States for a year, so I made a wearable sundial as a leaving present that they could carry with them.

Calculating its error turned the gift into an engineering project. A sundial shows apparent solar time, which differs from clock time for three reasons.

EffectCauseSize
Longitude Central European Time uses a reference meridian east of Munich; the correction is four minutes per degree ≈ 14 min, constant
Equation of time The eccentricity of the Earth's orbit and the tilt of its axis −14 to +16 min
Daylight saving Legal adjustment to clock time 60 min, or 0

Because the dial would be used in another location, I built a website that calculates its correction for the listed cities and any date.

The correction, running

This is the same calculation the tool does. Pick a date and a place, and it returns the difference between what the dial reads and what a clock reads.

The dial reads behind the clock
Longitude
Equation of time
Daylight saving

Add this to the dial reading to get clock time. Latitude sets the angle of the gnomon; the time correction uses longitude and date. Custom mode estimates the time zone from longitude and uses European daylight-saving dates.

How it works

The tool takes a date and a location and returns the offset in minutes between what the dial reads and what a clock reads. The longitude correction is the difference between the local meridian and the time-zone meridian, at four minutes per degree. The equation of time is computed for the date. Daylight saving follows the local rule for each listed city and European dates in custom mode. Latitude determines the angle the gnomon has to make with the horizontal, so the physical dial must be adjusted when it moves to a new latitude.

The object went through several versions before the one I gave away. Gold plating took longer than planned, so I finished the day before the flight. Next time I would schedule finishing as its own process because it has separate failure modes.

Fig. 2Forming jig
A 3D-printed jig holding the straight metal strip used for the sundial band
A printed jig set the bend radius of the metal strip

I printed this jig to bend the metal strip to a repeatable radius before marking and finishing the wearable band.

What I documented

I kept a booklet with every sketch, calculation, failed version and a Polaroid of each stage. It lets the recipient see how the object was made, and it lets me reconstruct why I made each decision.

Where it stands

The sundial was given away in December 2025. The web tool is online and supports the listed cities and an approximate custom-longitude mode.

Next project3D models
06 →